| | |
| |
|
Ár |
0 Ft |
| Rövid leírás |
Angol nyelvű specifikációval.
Universal amplifier for applications from 50 to 200 watts 4 speaker connections (A and B outputs for both channels) High current for stable operation at 2 Ohms Channel pairs are bridgeable for up to 200 watts @ 4 Ohms Class AB input stage plus premium Class D power stage One Independent audio sensing trigger One Independent 12 volt trigger input Looping 12 volt trigger output for one zone Speaker level input for expanding systems w/out pre out jacks One bus input can be routed to any zone Looping output to connect additional amplifiers.
|
| Termék kódja |
37599
|
| Súly |
3.10 kg
|
|
Full Range Mono RCA Output
| |
|
80Hz low pass Mono RCA output (for sub)
| |
|
Built in 80Hz low pass filter in bridged mode for driving in-wall/in-ceiling woofers or passive sub(s)
| |
|
Power Output
| |
|
RMS, All Channels Driven (20 Hz - 20 kHz)
| |
|
50 watts x 2 @ 8Ω
| |
|
90 watts x 2 @ 4Ω or 2Ω
| |
|
160 watts x 1 @ 8Ω (Bridged)
| |
|
200 watts x 1 @ 4Ω (Bridged) Frequency Response
| |
|
10 Hz - 60 kHz, +0/-3 dB Total Harmonic Distortion
| |
|
< 0.05% at typical listening levels < 1.0% at full power Interchannel
| |
|
Crosstalk 70 dB at 20 kHz Input Sensitivity
| 700mv = Full output (50 Watts @ 8 Ω) Total Gain = 29 dB (Level controls set to Maximum) S/N Ratio > 112 dB, input shorted, IHF A-weighted DC Trigger Requirements +9 Vdc to +12 Vdc, 2 mA Audio Trigger Requirements 2 mV Audio Signal AC Power Requirement |
|
Watts Maximum
| |
|
15 Watts Typical
| |
|
7.5 Watts Idle
| |
|
0.5 Watts Standby
| |
|
110-130 VAC 60 Hz or 220-255 VAC 50 Hz
| |
|
Note
| AC mains voltage is set only by qualified electronics technician. |
|
Dimensions
| |
|
Width
| 8.5" (220 mm) Depth |
|
Weight
| Net |
|
Shipping
| 7 lbs (3.1kg) |
